|
Attachments Pallet Forks
Made to fit any make or model
Rated at 5,500 pounds.
42" & 48" $675 |  | Removable tooth bar for buckets
$4.50 per inch
measure inside of bucket |  | Hay Forks
Easy in and out forks for large round or square bales. 3,000 lb. rated per spear, held in sleeve with one bolt. $450 |  | 3 Pt. Adapter with receiver hitch
Cat. I & II $450 |  | Heavy Duty Buckets
$9.00 per inch |  |
Grapple Bucket
This Grapple Bucket easilypicks up logs, rocks, leftover building supplies or any other type of debris. Cylinders have a 2" bore and a 10" stroke, and operate independently to adjust for uneven loads. The hydraulic lines are routed inside the tubingto prevent tears. It is built with top quality steel, oversized points and bushings, and every pivot point has grease fittings. Every unit exceeds the lifting capacity of the skid steer machine it is on. Available in Heavy-Duty or Extreme with optional weld-on teeth. Call or email for additional sizes and prices.
72" Heavy Duty Grapple Bucket $2,145
72" Extreme Grapple Bucket $2,500
|  | Stump Grapple
The X-treme Stump Grapple is made from 1/2" top quality plate, 1" cutting edge, replaceable teeth and 3/8" hose. No need to have another attachment for loading the stump into your dump truck, or moving the stump to a burn pile. $1,100.
|  | 4-In-1 Bucket
The 4-In-1 Bucket cylinders have a 2.5" bore and an 8" stroke. It is equipped with a 3/4" x 6" cutting edge on the digging edge and 1/2" x 4" at all other ground engaging points. It is also built with top quality steel, oversized points and bushings, and every pivot point has grease fittings. Every unit exceeds the lifting capacity of the unit it is used on. Call or email for additional sizes and prices.
72" 4-In-1 Bucket w/8 teeth $2,190
72" Extreme 4-In-1 Bucket w/8 teeth $2,490 |  | Heavy Duty Root Grapple
The Heavy Duty Root Grapple is ideal for moving logs, brush, rocks or just about any type of debris. Each hydraulic cylinder has a 2" bore with a 10" stroke and operate independently to adjust for uneven loads. It is built with 1/2" top quality steel with greasable pins and bushings at all hinge points. Available in Heavy Duty or Extreme. Call or email for additional sizes and prices.
72" Heavy Duty Root Grapple $1,950
72" Extreme Root Grapple $2,300 |  |
|
